GOOTWICK CP-2015 Original Desoldering Wick

GOOTWICK CP-2015 Original Desoldering Wick

Feature :-

1. Quickly removes unwanted solder when used with a soldering iron.
2. Only touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.
3. To avoid fire, never use a soldering iron and desoldering wick around combustibles or in an explosive environment.
4. Do not force the tip against the desoldering wick to avoid injury to yourself and/or damage to the parts and PCB.
5. Do not heat the desoldering wick for more than 5 seconds to avoid damage to the parts and PCB. Different Size for choose.

Use :-

• Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick.
• The solder will be absorbed. Remove the desoldering wick after the solder has been absorbed.
• Cut off the used section of the wick using nippers.
• Our thin and soft desoldering wire flat braid has efficient thermal transmission.
• Removes solder faster with better heat response than previous wicks.
• Recommended for lead-free solder with high heating load.
• RMA base flux. High-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux.
• Can be used for precision PCBs safely. 

NOTE - ANY HELP WHATSAPP - 8450801502