KOOCU CP-2015 Desoldering Wick for Precision PCB Work

KOOCU CP-2015 Desoldering Wick for Precision PCB Work is designed to effectively remove excess solder with precision, ideal for delicate PCB repairs. This high-quality desoldering wick is made with fine copper braiding, ensuring optimal heat transfer and efficient solder absorption without damaging components. The 2.0mm width offers control in tight areas, making it suitable for removing solder from small pads and joints. Essential for rework and repair, the KOOCU CP-2015 desoldering wick ensures clean, professional results, trusted by both professionals and hobbyists in electronics

Feature:-

1. Quickly removes unwanted solder when used with a soldering iron.
2. Only touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.
3. To avoid fire, never use a soldering iron and desoldering wick around combustibles or in an explosive environment.
4. Do not force the tip against the desoldering wick to avoid injury to yourself and/or damage to the parts and PCB.
5. Do not heat the desoldering wick for more than 5 seconds to avoid damage to the parts and PCB. Different Size for choose.

Use:-

• Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick.
• The solder will be absorbed. Remove the desoldering wick after the solder has been absorbed.
• Cut off the used section of the wick using nippers.
• Our thin and soft desoldering wire flat braid has efficient thermal transmission.
• Removes solder faster with better heat response than previous wicks.
• Recommended for lead-free solder with high heating load.
• RMA base flux. High-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux.
• Can be used for precision PCBs safely.  

PACKAGE CONTAINS :-

1 X KOOCU CP-2015 DESOLDERING WICK